Dell Printer Error Code 009-654


Printers have made documenting of the important document so much convenient and instant. That’s we find ourselves so much dependent on them even in this heavily internet dependent modern life.

But it becomes very tricky and daunting when amidst work time, the printer out of the blue gives up on processing our print commands. Why do these errors come up and what can we do to resolve them? For the first question, well, the reasons can be several, based on the type of error. And for the second question- this article is your answer when it comes to dealing with the error- ‘Dell printer error code 009-654.’

Possible cause:

There can be several reasons that can lead your printer to display this error. Some of them are as follows:

  • Sometimes when the transfer belt of your printer doesn’t sits well in your printer, it can lead to this error.
  • This error is often caused by the usage of an old version of the firmware.
  • And at times all your printer needs a reset.

Well, by understanding the reasons, you can now handle the troubleshooting methods in a much better way and can take a better care of your printer for the future usage.

Troubleshooting of ‘Dell Printer error code 009-654’:

In this section of the article, we will look at the ways of troubleshooting this error, and some general tips to bear in mind while performing the troubleshooting methods. Just make sure you follow the steps in the order as they are mentioned here. So let’s get going!

Quick Fix 1:

Let us start with simple power cycle to see if the error can be tackled by it. Yeah, it’s a simple method, but it is surprisingly effective! So let’s look at the steps:

  • Make sure your printer is switched on.
  • If it is in sleep mode, wake it up by pressing any button.
  • Now press the power button of the printer to switch it off.
  • You now need to wait for a while to allow your printer to cool off.
  • After the wait, please switch it on again.
  • Give your printer a minute or two to initialize all its internal functions properly before you start to use it.

If the error still persists, then please move on to the next solution.

Quick Fix 2:

If the error reappears after the above power cycle instructions, then you need to reseat the transfer belt of the printer. Here is how you can do it:

  • Make sure your printer is switched on.

Note: If it is has gone into the sleep mode then you first need to wake up the machine by pressing any button.

  • Press and hold the power button to switch off the printer.
  • Disconnect the USB cables from the printer.
  • Disconnect the connections of the printer with the computer and from the wall outlet.
  • Long press the power button to release any remaining current in the device.
  • Press the front cover of the printer to open it.
  • Carefully pull the belt release levers.
  • Rotate the belt upwards to make it perpendicular to the front cover.
  • Inspect the connector on the top left of the belt, and the printer side connector for any damage.
  • After the inspection, carefully lower the belt back into its position.

Note: Ensure the connectors get aligned properly and the belt is properly seated.

  • Close the front cover after the process.

Quick Fix 3:

Other methods to resolve this error are as follows:

  • Print a Contamination Check Report. If any of the test pages are lighter, then you need to contact Dell for the technical support.
  • Run the diagnostics on the ‘Analog to Digital convertor sensor solenoid.

Scope of Service:

We hope this comprehensive step by step guide helped you to resolve the ‘Dell Printer error code 009-654.’ In case if you need Dell printer technical  support, please feel free to contact our team of experts 24/7 at:

Customer Speak


I was impressed with the services offered by the support and repair team of mycomputerrepair as they were able to look and find out the issue of my laptop not working. They also provided easy solution to keep the system clean for future.

Alex Cooper — United States


Repair team of mycomputerrepair very recently i contacted for my laptop issues. They took their time to repair it but in the end my system was working properly so Kudos to their repair and support team.

Cole Lincoln — United States


Although they took a little time to response mycomputerrepair support team gave out the best repair tips. The team also listened to my problem patiently and were decent to respond to it as quickly as possible.

Jared Smith — United States


Mycomputerrepair technical people came to my system rescue and repaired it very quickly!! They were very good with the services but were reluctant to provide any extra tips. All i want to say is to give out a little advice if required and thank you for correcting my laptop.

Terrence Walters — United States


I am too greatful and want to thank Mycomputerrepair company for their quick work on my laptop that has stopped working mid way of an important task. They easily found out the problem and fixed it quickly.

John Wick — United States


The service subscription I got from you is the best investment I have made for our computer!!!!! You have no idea how much your tech”s have helped me to fix my compter issues. You guys rock!!

Holly — United States


Took time to fix and clean my laptop. Now it running smooth. Just keep up that good work, that is difficult to find anywhere else.

Marcus — United States


I depends on my computer and I was terrified to see that it went off while working. Thankfully due to the technicians of   Mycomputerrepair, my computer was  covered…

Angela W — United States

Call Now: +1-800-828-6304